What is the PerformancePro ArtesianPro Low RPM Pump used for?

The PerformancePro ArtesianPro Low RPM Pump is a self-priming external pond pump designed for koi ponds, large water gardens, waterfall systems, and pondless waterfall applications requiring continuous 24/7 operation. Featuring a motor that runs at 1,725 RPM, it delivers flow rates from 6,600 to 12,000 GPH, making it the ideal choice for ponds ranging from 3,000 to 50,000 gallons.

How many GPH does the PerformancePro ArtesianPro pump move?

The ArtesianPro series covers between 6,600 GPH (AP1/4-66 model, at 2 ft head) and 12,000 GPH (AP1-120 model, at 6 ft head). Your actual flow rate will depend on your total head pressure, including both the vertical lift and pipe friction losses. Therefore, it is always advisable to calculate the total head of your system before selecting a model.

Is the PerformancePro ArtesianPro an energy-efficient pond pump?

Yes. The low-RPM 1,725 RPM motor design uses a lot less energy than conventional 3,450 RPM pumps. The AP1/4-66 moves 6,600 GPH with just 370 actual watts. For continuous 24/7 pond operation, the ArtesianPro typically saves pond owners $15-$30 per month compared to older high-RPM equivalents.

Does the ArtesianPro pump work for saltwater or treated koi ponds?

Yes, with the Saltwater Kit. This kit adds a PVC shaft sleeve and a PTFE-coated stainless steel seal with silicon carbide faces, making it all corrosion resistant for environments that are treated with brackish or chloride. The warranty for the saltwater configuration is only 1 year, compared to the standard 3 years for freshwater.

What fitting sizes does the ArtesianPro pump include?

The ArtesianPro comes with 3-inch port fittings and quick-disconnect unions as standard. If your installation uses 2-inch pipe, simply select the 2-inch fitting option when you check out. Quick-disconnect unions come with both sizes of fittings so that you can do tool-free maintenance and remove the pump in any season.

Is the ArtesianPro pump safe to install near koi and fish?

Absolutely. Being an above-ground (out-of-water) pump, the ArtesianPro removes the possibility of oil or electrical leaks which submersible pumps can pose to pond ecosystems. Positioned outside the pond and with water fed via plumbing, the koi and other pond life are protected from any contamination relating to the pump.

Can I hard-wire the ArtesianPro pump instead of using a cord?

Yes. The no-cord option permits a licensed electrician to hard-wire the pump directly to a dedicated 230V circuit. PerformancePro recommends a dedicated 20-amp circuit for hard-wired installations. The standard option comes with an 8-foot 230V 20-amp cord.

PerformancePro | SKU: AP1/4-66-2

PerformancePro ArtesianPro Low RPM External Pumps

Verified Buyer

$1,301.50 $1,370.00

Model: AP1/4-66

Cord Option: No Cord

Cord Option

No Cord With 8ft. Cord

Fitting Size: 2 Inch

Fitting Size

2 Inch 3 Inch

Free Shipping

On orders over $149

Expert Support

Why Pros Choose the PerformancePro ArtesianPro Low RPM Pump

ArtesianPro is the ideal solution for serious water movement without loud noise. It helps you avoid high energy bills and disruptive equipment.

1,725 RPM Operation — Much quieter than fast pumps. It is perfect for ponds near living spaces.
Self Priming Design — The built-in priming pot with a clear Lexan lid allows for fast priming and easy debris checks.
Stainless Steel Shaft Seals — These corrosion-resistant seals prevent oil leaks and protect your pond ecosystem.
Quick-Disconnect Unions — Service your pump in minutes. 2" and 3" union options are included.
TEFC Motor — This totally enclosed fan-cooled motor blocks out dust and moisture.
Safe for Fish — The external design ensures no electrical or oil leaks harm your koi.
USA Made — Built with premium components and strict quality control.
3-Year Warranty — The best limited manufacturer's warranty for freshwater use.

Built-In Priming Pot with Clear Lexan Lid

The integrated leaf trap captures debris before it hits the impeller. This safeguards the pump and extends regular service intervals.

The clear Lexan cover allows for quick visual inspections. The special clamp ring ensures a positive seal with minimal O-ring wear.

Quiet 1,725 RPM Motor

Most pumps run at 3,450 RPM and create substantial noise. This motor runs at a whisper, making it a game-changer for patios.

Lower RPMs reduce wear on impeller bearings. This increases the lifespan of the unit compared to high-pressure systems.

Corrosion-Resistant Shaft Seals

Our stainless steel seals resist minerals common in outdoor features. They provide a tight seal to keep your koi and water safe.

These seals are specifically engineered for continuous pond immersion and maximum durability in water.

3" Standard Ports — 2" Available

Standard 3-inch ports fit most large koi ponds. Select the 2-inch fitting option at checkout if needed. Both include quick-disconnect unions.

Optional Saltwater Kit

Need chloride resistance for a marine-influenced feature? The Saltwater Kit adds a PVC sleeve and PTFE-coated seals.

This kit is ideal for coastal environments. Call Puget Sound Ponds for pricing and availability regarding these upgrades.

MPC-10 ProTect Pump Cover Compatible

Protect your pump from UV and rain with the PerformancePro MPC-10 ProTect Pump Cover, sold separately at pugetsoundponds.com today.

Instruction Manual

Estimate shipping

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Frequently Asked Questions

Got a question? We are here to answer

PerformancePro ArtesianPro Low RPM External Pumps