What distinguishes the Aquascape AquaForce from a typical pond pump?

Most standard submersible pond pumps use magnetic-drive motors. These work fine in clean water but their efficiency diminishes as the head height increases, and they tend to clog when solids enter the housing. The AquaForce uses an asynchronous motor, which maintains torque at greater heights, uses fewer watts for the same flow output, and can handle debris up to 1/4" in diameter without clogging. It also runs completely oil-free, which makes it safe for fish and plants - in a way that some older motor designs aren't.

Can the AquaForce be placed directly in the pond without a prefilter?

Yes, the AquaForce is designed for placement directly in the pond. The protective pre-filter cage surrounds the housing, keeping large objects away from the impeller while allowing smaller solids to pass through and be pumped to your filter system. Its wide flat base keeps the pump stable at the bottom of the pond. You can run this pump without a separate prefilter box, but adding one will reduce how often you have to clear the cage.

How much can the AquaForce save on electricity compared to older pond pumps?

Actual savings vary based on your previous pump model and the electricity rates in your locality. Aquascape states that the design with an asynchronous motor saves hundreds of dollars over traditional water pumps for a full operating season. For reference, the AquaForce 3600 gives close to 3,900 gallons per hour while running at 215 watts. Older magnetic-drive pumps that deliver similar flow often draw significantly more wattage, especially at higher head heights.

Will the AquaForce pump harm koi and pond fish?

No, it won’t. It’s all because of the oil-free motor that comes with the AquaForce. The design of the motor makes sure there is no chance of oil leaking into your pond water. This pump is safe for koi, goldfish, other pond fish, and all aquatic plants.

What size AquaForce do I need for a 3,000-gallon koi pond?

The AquaForce 3600 is the model most koi pond owners choose for a 3,000-gallon pond. It gives up to 3,868 GPH at maximum flow, which cycles over the complete volume of the pond more than once per hour. If your filter return or waterfall is over 12 feet above the pump location, then you should consider the head height loss and upgrade to the AquaForce 5200 to maintain strong flow at the outlet.

What warranty comes with the AquaForce pump?

All of the Aquascape AquaForce Solid-Handling Pond Pumps that Puget Sound Ponds sells come with Aquascape's 3-Year Limited Manufacturer Warranty. This protects against defects in materials and workmanship under normal operating conditions. A three-year warranty on a submersible pond pump is significantly longer than the average in the industry.

How do I remove the AquaForce pump for winter storage or cleaning?

The AquaForce has a threaded disconnect fitting, allowing you to take the pump out of your pipe assembly without taking off hose clamps or disassembling your plumbing. This is how the pump is pulled for winterization or midseason cleaning. In places with mild climate like the Pacific Northwest, many pond owners keep the AquaForce running throughout the year and only shut off the flow in the winter months.

Which AquaForce model works best with an external pressure filter?

Any AquaForce model can work with an external pressure filter, although the best choice is determined by your pond volume and the inlet of the filter. This is because most mid-size pond and pressure filter setups use the AquaForce 2700 and 3600. This is because of its high torque at head height and solid-handling capability, features that make it the best pump according to Aquascape for use with external pressure filters.

Aquascape | SKU: 91012

Aquascape AquaForce Solid-Handling Pond Pumps

Verified Buyer

$303.99 $379.99

Model: AquaForce 2700 Solid-handling Pond Pump

Model

AquaForce 1000 Solid-handling Pond Pump AquaForce 1800 Solid-handling Pond Pump AquaForce 2700 Solid-handling Pond Pump AquaForce 3600 Solid-handling Pond Pump AquaForce 5200 Solid-handling Pond Pump

Free Shipping

On orders over $149

Expert Support

Product Description

If your pond has a lot of debris, fish waste, or organic buildup, you already know what happens to a pump not built for it: constant clogging, reduced flow, early burnout. The Aquascape AquaForce Solid-Handling Pond Pump? It handles all that without complaint. It rests right on the pond's bottom, moves solids of up to a quarter inch in diameter through its housing without getting stuck, and does its work of moving water throughout the whole season using far less electricity than older pump designs using magnetic drive. For a small backyard water garden that needs 1,000 GPH or for a large koi pond demanding 5,200 GPH, there is an AquaForce model made for that specific size of job.

Why the AquaForce Performs Better

Standard pond pumps have a magnetic-drive motor. That design works in clean water; as soon as head height increases or if there is any resistance to push water through, the efficiency is lost. The AquaForce uses an asynchronous motor — it maintains torque at height and draws less wattage doing that. The result is performance over a full pond season instead of just looking good in a spec chart.

The ceramic shaft in the motor has a dedicated cooling port to stabilize the temperature while in operation for extended periods. This is why Aquascape has the confidence to back every AquaForce pump with a 3-Year Limited Warranty, longer than most competitors in this category. The motor is also completely oil-free, so there is no risk of contamination to the fish or aquatic plants no matter how long the pump runs.

What You Get With Every AquaForce Pump

Handles Solids Up to 1/4 Inch Debris, fish waste, and small organic matter will be able to flow through the pump without clogging the impeller or forcing you to clean it multiple times in a season.	Asynchronous Motor Technology Higher torque at greater head heights than traditional magnetic-drive pumps, with lower overall wattage consumption throughout the season.
Oil-Free Motor Design No oil in this pump at all. Fish, koi, and pond plants are completely safe no matter how long the pump runs.	Pre-Filter Protective Cage A big cage bars big things from getting to the impeller but lets solid particles through for filtration, reducing impeller damage.
Wide Flat Base Stands steady right on the pond floor without tipping or needing any hardware for mounting. No additional brackets, no headaches about positioning.	Threaded Disconnect Fitting Pull the pump out for winter storage or cleaning without removing hose clamps or disassembling the entire plumbing assembly.
25-Foot Power Cord Included on every model, it gives you real flexibility in pump placement without needing extension cords in most standard pond setups.	3-Year Limited Warranty Aquascape covers it for three years from purchase. That warranty period is unusually long for a pond pump. It signals real confidence in build quality.
Multiple Fitting Options It comes with 1-1/4 inch, 1-1/2 inch, and 2 inch multi-hose fittings plus a locking rotational ball fitting. This makes it compatible with nearly any existing pipe setup.	Saves Money Long-Term People who own ponds say they save a noticeable amount on electricity when they switch from the old AC-induction pumps to AquaForce for a complete pond season.

Features at a Glance

Submersible solid-handling pump that is designed to be placed directly on the pond floor
Capable of handling solids up to 1/4 inch in diameter without clogging or damage to the impeller
The motor is asynchronous, providing high torque and real energy savings as compared to mag-drive pumps
The ceramic shaft has a built-in cooling port to prevent overheating during continuous operation
Motor construction that is oil-free keeps pond water safe for koi, goldfish, and aquatic plants
Durable pre-filter protective cage that shields the impeller from large debris
Wide, flat base for stable, secure placement directly on the pond floor
Threaded disconnect that allows fast pump removal without dismantling pipe connections
Available in five flow rates: 1000, 1800, 2700, 3600, and 5200 GPH
25-foot power cord included on all five models
Comes with 1-1/4 inch, 1-1/2 inch, and 2 inch multi-hose fittings plus a locking rotational ball fitting
Works with all Aquascape BioFalls filters external pressure filters, and pondless waterfall basins
Perfect for koi ponds, water gardens, and waterfall filtration systems
3-Year Limited Manufacturer Warranty on all models

Compatibility and Use Cases

What This Pump Works With

The AquaForce goes with the whole Aquascape product line directly but also fits other filter setups and plumbing. Here's what it connects to clean:

Aquascape BioFalls and waterfall filter boxes
External pressure filters from all major brands
In-pond skimmer prefilter chambers
UV clarifier inline configurations
Pondless waterfall basin setups
Gravity-fed filter systems with bottom drain connections
Standard 1.5 inch and 2 inch flexible pond tubing

The included fitting set covers 1-1/4 inch, 1-1/2 inch, and 2 inch connections plus the rotational ball fitting, so retrofitting this pump into an existing plumbing setup is usually a straightforward swap.

Product Manual